Wolf DF364C Guide d'installation télécharger pdf (Page 3)

Dual Fuel Range Installation

IMPORTANT NOTE: T

his installation must be completed

by a qualified installer, service agency or gas supplier.

Read this entire installation guide prior to installation and

save for the local inspector’s reference. The homeowner

should keep this installation guide for future reference.

This appliance must be installed in accordance with

National Electrical Codes, as well as all state, municipal

and local codes. The correct voltage, frequency and

amperage must be supplied to the appliance from a dedi-

cated, grounded circuit which is protected by a properly

sized circuit breaker or time delay fuse. The proper

voltage, frequency, and amperage ratings are listed on

the product rating plate.

Wolf dual fuel ranges are manufactured for use with

natural gas or LP gas. Check the product rating plate for

the type of gas for your specific model. If this appliance

does not correspond to your type of gas, contact your

authorized Wolf dealer.

Record the model and serial numbers before installing the

dual fuel range. Both numbers are listed on the product

rating plate, located on the bottom of the control panel

assembly, at the far right, just above the oven door. Refer

to the illustration below.

Wolf Dual Fuel Ranges 3

wolfappliance.com/specs

olf Dual Fuel Range

Model Number

Serial Number

Location of rating plate.

RATING PLATE

1 2 3 4 5 6 7 8 ... 19 20

Pas de commentaire

Wolf DF364C Guide d'installation Page 3