Wolf 1524 Spécifications télécharger pdf (Page 15)

15

Dimensions in parentheses are in

millimeters unless otherwise specified.

I N S TA L L AT I O N I N S T R U C T I O N S

G A S L E A K T E S T I N G

Use a brush and liquid detergent to test all gas

connections for leaks. Bubbles around connec-

tions will indicate a leak. If a leak appears, shut

off the gas valve and adjust connections. Then

check connections again. Clean all the deter-

gent solution from the range.

Never test for a gas leak with a match or

other flame.

G A S M A N I F O L D P R E S S U R E

For Natural Gas:

Standard orifices

are set for 5" (12.5 mb) WC (water column).

A natural gas pressure regulator is

installed.

For Propane (LP) Gas:

Standard orifices

are set for 10" (25 mb) WC (water column).

A propane gas pressure regulator is

installed.

Gas Supply Pressure:

For checking the

regulator setting, the maximum line

pressure for natural and propane (LP) gas:

14" (34.9 mb) WC; .5 psi (3.5 kPa). Minimum

line pressure for natural gas: 7" (17.5 mb)

WC. Minimum line pressure for propane

(LP) gas: 11" (27.4 mb) WC.

Gas Supply Regulator:

To control and

maintain a uniform gas pressure in the gas

manifold, the unit must be used with a gas

pressure regulator. The burner orifices, etc.

are sized for the gas pressure delivered by

the supplied regulator. Do not remove the

regulator.

The maximum gas supply pressure to

the regulator should never exceed 14"

(34.9 mb) WC; .5 psi (3.5 kPa).

Before connecting the gas supply, make

sure all valves are in a closed position. Do

not connect the gas supply to an appli-

a

nce that shows any sign of physical

damage.

G A S S U P P LY R E Q U I R E M E N T S

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire