Wolf TYG48C Manuel d'utilisateur Page 6

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 8
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 5
- 6 -
GAS PRESSURE REGULATOR INSTALLATION
Gas regulator pressure is preset at 5” Water Column (W.C.) for natural gas, and 10” W.C.
for propane gas. No further adjustment should be required.
Install the regulator as close to the griddle on the gas supply line as possible. Make sure
that the arrow on the underside of the regulator is oriented in the direction of gas flow to
the griddle (Fig. 1) and the regulator is positioned with the vent plug and adjustment
screw upright (Fig. 2).
Fig. 1
Fig. 2
The supply pressure (upstream of the regulator) should be 7-9” W.C. for natural gas and
11-12” W.C. for propane gas. At no time should the griddle be connected to supply
pressure greater than ½ psig (3.45 kPa) or 14” W.C.
TESTING THE GAS SUPPLY SYSTEM
When the gas supply pressure exceeds ½ psig (3.45 kPa), the griddle and its individual
shutoff valve must be disconnected from the gas supply piping system.
When the gas supply pressure is ½ psig (3.45 kPa) or less, the griddle should be isolated
from the gas supply system by closing its individual manual shutoff valve.
GRIDDLES MOUNTED ON STANDS WITH CASTERS
Griddles mounted on stands with casters
must use a flexible connector (not supplied) that
complies with the Standard for Connectors for Movable
Gas Appliances ANSI Z21.69•CSA6.16, and a quick-
disconnect device that complies with Gas Fuel, ANSI
Z21.3•CSA6.9. In addition, adequate means must be
provided to limit movement of the appliance without
depending on the connector and the quick-disconnect
device (or its associated piping) to limit appliance
movement. Attach the restraining device at the rear of
the griddle as shown in Fig. 3.
Fig. 3.
If disconnection of the restraint is necessary, turn off the gas supply before
disconnecting. Reconnect the restraint prior to turning the gas supply on and returning
the griddle to its installation position.
Casters are only supplied on a griddle stand. If the griddle is moved for any reason the
griddle should be re-leveled (see LEVELING in this manual).
Vue de la page 5
1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Franke KBX160_34L manuales

Manuales del propietario y guías del usuario para Fregaderos De Cocina Franke KBX160_34L.
Ofrecemos 1 manuales en pdf Franke KBX160_34L para descargar gratis por tipos de documentos: Ficha de datos


Franke KBX160_34L Ficha de datos (1 paginas)


Marca: Franke | Categoria: Kitchen sinks | Tamaño: 0.11 MB |

 

Tabla de contenidos





Más productos y manuales para Fregaderos De Cocina Franke

Modelos Tipo de documento
EUX621R Ficha de datos   Franke EUX 621-112, 1 paginas
LAX160L Ficha de datos   Franke LAX 160, 1 paginas
KBG11016GP Ficha de datos   Franke KBG 110-16, 2 paginas
INX611R Ficha de datos   Franke INX 611, 1 paginas
COK611GW Ficha de datos   Franke COK 611, 1 paginas
COG621CPACK Ficha de datos   Franke COG 621, 1 paginas
COK651GWPACK Ficha de datos   Franke COK 651, 1 paginas
STX621-ERHD Ficha de datos   Franke STX 621-E, 1 paginas
COG611GC Ficha de datos   Franke COG 611, 1 paginas
KBX160_34-16RDP Ficha de datos   Franke KBX 160-34/16RDP, 1 paginas
KBX16045-20RDP Ficha de datos   Franke KBX 160-45/20, 1 paginas
ARX621RHD Ficha de datos Franke ARX 621, 2 paginas
MTG651100RPW Ficha de datos   Franke MTG 651-100, 1 paginas
MMX661LDP Ficha de datos   Franke MMX 661, 1 paginas
VBK651R Ficha de datos   Franke VBK 651, 1 paginas
85750787 Ficha de datos   Franke ZODIACO-ZOT 621I, 2 paginas
CPX652-E Ficha de datos Franke CPX 652-E, 2 paginas
CNX651DP/RHD Ficha de datos Franke CNX 651, 2 paginas
CPX620 Ficha de datos Franke CPX 620, 2 paginas
COK651EO Ficha de datos   Franke COK 651, 1 paginas