Wolf ICBCT30EU Manuel d'utilisateur télécharger pdf (Page 15)

15

INSTALLATION INSTRUCTIONS

FRAMELESS INSTALLATION

Unframed electric cooktop Models ICBCT30EU

and ICBCT36EU can be installed as a frameless

application, with the glass mounted on top of

the countertop surface. For countertop cut-out

dimensions, refer to the Installation Specifica-

tions illustration on page 12 for Model

ICBCT30EU and page 13 for Model ICBCT36EU.

UNFRAMED INSTALLATIONS

FLUSH MOUNT INSTALLATION

OPTION 2:

For this flush mount installation,

the countertop cut-out will be the same size as

the outer edge of the glass top. It is recom-

mended that cooktop itself be used as the

template for the cut-out. Turn the cooktop over

and mark the opening using the glass top as a

template.

It will be necessary to attach L-shaped brackets

or cleats to the inner perimeter of the cut-out

to support the cooktop. The top edge of the

bracket can be no wider than 22 mm and will

be attached 8 mm below the surface of the

countertop. Refer to the illustration below.

Attachment of the brackets is up to the

installer's discretion, wherever enough coun-

tertop material is present.

For additional support in the cut-out area,

adhere scrap countertop material to the

bottom side of the countertop. Consult your

countertop supplier for the proper methods of

attachment.

22 mm

8 mm

L-Shaped

Brackets

Flush mount installation brackets

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 93 94

Commentaires sur ces manuels

Pas de commentaire