Wolf GR606DGLP Guide d'installation télécharger pdf (Page 14)

Gas Range Installation 14

Anti-Tip Bracket Installation

An anti-tip bracket is provided with the gas range. Install

the anti-tip bracket a minimum of 6

/2" (165) from the

floor. If the range legs and casters are adjusted higher

than the 3" (76) minimum, the anti-tip bracket must be

mounted higher accordingly to engage the rear channel

brace on the range. The gap between the anti-tip bracket

and the rear channel brace should not exceed

/4" (6).

Refer to the illustration below.

Install the Range

IMPORTANT NOTE: B

efore moving the range, protect any

finished flooring to avoid damage to the floor. Secure oven

door(s) closed.

Using an appliance dolly, move the gas range into position

near the installation opening. Remove and discard packing

materials. If the oven door(s) need to be removed to

position the range, refer to oven door removal on the

following page.

Push the gas range back into the opening until it is flush

with the back wall. Be sure that it engages the anti-tip

bracket.

BACK

WALL

REAR

CHANNEL

BRACE

ANTI-TIP

BRACKET

FLOOR

/2"

(165)

MIN

Anti-tip bracket installation.

This range can tip. Injury to persons could result. Install

the anti-tip bracket provided with the gas range.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Wolf GR606DGLP Guide d'installation Page 14