Wolf Warming drawer Guide d'utilisation et d'entretien Page 9

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 16
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 8
Warming Drawer Use & Care 9
wolfappliance.com
Before Using for the First Time
R
emove all literature and packaging materials from inside
the warming drawer.
Clean your warming drawer thoroughly with hot water and
a mild detergent. Rinse and dry with a soft cloth. This
removes residual oil and grease left on the surface from
the manufacturing process.
Apply a stainless steel polish to protect the finish and add
luster to the exterior of your warming drawer. Refer to
cleaning and care recommendations on page 12.
Control Panel Backlighting
T
he Wolf warming drawer has three options for control
panel backlighting; backlight off in Sabbath, backlight on
in Sabbath and backlight off in all modes. The backlight
defaults to ON in normal use and OFF in Sabbath mode.
TO CHANGE CONTROL PANEL BACKLIGHTING:
1) Warming drawer must be OFF.
2) Touch and hold TEMP UP arrow and TIMER UP arrow
for 5 seconds. The current backlight setting will appear
in the LCD display.
3) Use the TIMER UP arrow to scroll through the three
backlight options; backlight off in Sabbath, backlight
on in Sabbath (50% power), and backlight off in all
modes. A selection should be made within 30 seconds.
The unit will default to the current backlight setting if a
new selection is not made within this time.
4) With the desired backlight setting selected, touch
POWER ON/OFF to save the setting.
Temperature Display
The warming drawer temperature display can be changed
from Fahrenheit (F) to Celsius (C) or vice versa.
TO CHANGE TEMPERATURE DISPLAY:
1) Warming drawer must be OFF.
2) Touch and hold both the TEMP UP and DOWN arrows
for 5 seconds.
3) After 5 seconds, the unit will beep, the backlighting will
turn on, and either F or C will appear, depending on the
current display setting.
4) Touch the TEMP UP or DOWN arrow to select either
Fahrenheit (F) or Celsius (C).
5) With the desired temperature display selected, touch
POWER ON/OFF to save the setting.
Vue de la page 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire