Wolf Warming drawer Guide d'utilisation et d'entretien télécharger pdf (Page 8)

Sabbath Mode

abbath mode is for certain religious observances where

some warming drawer functions need to be turned off. In

Sabbath mode, the automatic shut-off feature is disabled,

allowing the warming drawer to operate continuously.

TO INITIATE SABBATH MODE:

1) Warming drawer must be OFF.

2) Touch and hold POWER ON/OFF for 5 seconds. The

word ”Sab” will flash in the LCD display after 5

seconds.

3) While ”Sab” is flashing, select one of the PRESETS or

set the temperature with the TEMP UP or DOWN arrow

pads. Touch the UP arrow to increase the temperature

and the DOWN arrow to decrease the temperature.

Two tones will signify that the Sabbath mode has been

initiated.

4) In Sabbath mode, the warming drawer will operate

continuously until POWER ON/OFF is touched. The

word ON will remain illuminated in the LCD display all

the while the unit is in Sabbath mode. No other read-

outs will appear in the LCD display.

5) Touch POWER ON/OFF to shut off the warming drawer

and exit Sabbath mode.

Warming Drawer Use & Care 8

Electronic Controls

PRESET PROGRAMMING

Preset temperatures and time settings can be adjusted for

the PROOF, LOW, MED and HIGH PRESETS.

The PROOF temperature range is 80–110˚F (25–40˚C).

The LOW, MED and HIGH PRESETS can be adjusted from

80–200˚F (25–95˚C).

TO ADJUST PRESET TEMPERATURE AND TIME SETTING:

1) Warming drawer must be OFF.

2) Touch POWER ON/OFF.

3) Touch and hold the desired PRESET, PROOF, LOW,

MED or HIGH for 5 seconds. The word TIMER will illu-

minate and ”4:00” will flash in the LCD display along

with the temperature. Adjustments to the settings

should be made within 30 seconds. The unit will exit

the preset programming mode if no adjustment is

made within this time.

4) To adjust the temperature, touch and hold the TEMP

UP arrow to increase or the DOWN arrow to decrease

the temperature until the desired preset temperature is

shown in the LCD display.

5) To adjust the time setting, touch and hold the TIMER

UP arrow to increase or the DOWN arrow to decrease

the time until the desired preset time setting is shown

in the LCD display.

6) Touch and hold the adjusted PRESET again for 5

seconds. Three quick tones will signify that settings for

the PRESET have been changed. If 30 seconds elapse

before you touch and hold the PRESET, the unit will

exit the preset programming mode with no adjustments

made.

When Sabbath mode is initiated, the automatic shut-off

is disabled, requiring the unit to be turned off manually

by touching POWER ON/OFF.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Wolf Warming drawer Guide d'utilisation et d'entretien Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Tiroirs chauffants Wolf Warming drawer