search

Wolf Sub-Zero 648PROG Guide d'installation Page 9

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 20
  • Table des matières
  • MARQUE LIVRES
    • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 8
PRO 48 Installation 9
subzero.com/specs
Anti-Tip Bracket Installation
WOOD FLOOR APPLICATIONS
Use the twelve #12 x 2
1
/2" wood screws and the twelve
#12 flat washers provided. Drill pilot holes
3
/16" (5)
diameter maximum and make sure the screws penetrate
through the flooring material and into the wall plate a
minimum of
3
/4" (19). Make sure the screws hold tight.
Refer to the illustration below.
CONCRETE FLOOR APPLICATIONS
Use the three
3
/8"x3
3
/4" concrete wedge anchors, six
#12x2
1
/2" wood screws and six #12 flat washers
provided. Drill pilot holes
3
/16" (5) diameter maximum and
make sure the screws penetrate through the flooring
material and into the wall plate a minimum of
3
/4" (19).
Then drill
3
/8" (10) diameter holes into the concrete a
minimum of 1
1
/2" (38) deep. Make sure the anchors and
screws hold tight. Refer to the illustration below.
INSTALL CONCRETE WEDGE ANCHORS:
1) Drill a
3
/8" (10) diameter hole any depth exceeding the
minimum embedment. Clean the hole or continue
drilling additional depth to accommodate drill fines.
Use a carbide drill bit manufactured within ANSI
B94.12-77.
2) Assemble the washer and nut flush with the end of
anchor to protect threads. Drive the anchor through the
material to be fastened until the washer is flush with
the surface material.
3) Expand the anchor by tightening the nut 3–5 tur ns past
hand-tight position or to 25 foot-pounds of torque.
Always wear safety glasses and use other necessary
protective devices or apparel when installing or
working with anchors.
Anchors are not recommended for use in lightweight
masonry material such as block or brick, or for use in
new concrete which has not had sufficient time to cure.
The use of core drills is not recommended to drill holes
for the anchors.
23
3
/4"
(603)
23
3
/4"
(603)
SUBFLOORING
WOOD FLOOR
WALL PLATE
FINISHED
FLOORING
23
3
/4"
(603)
23
3
/4"
(603)
SUBFLOORING
CONCRETE
FLOOR
WALL PLATE
FINISHED
FLOORING
1
1
/2"(38)
min
Wood floor. Concrete floor.
Vue de la page 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Commentaires sur ces manuels

Pas de commentaire
Produits connexes et manuels pour Non Wolf Sub-Zero 648PROG
Non Wolf Sub-Zero UC-24R Guide d'installation   (16 pages)
Non Wolf 600 Series BI-36UG Guide d'installation   (40 pages)
Non Wolf 600 Series BI-48S Manuel d'utilisateur   (13 pages)
Non Wolf W482210 Manuel d'utilisateur   (2 pages)
Non Wolf PL582212 Manuel d'utilisateur   (2 pages)
Non Wolf 685 Manuel d'utilisateur   (1 pages)
Non Wolf 811504 Manuel d'utilisateur   (270 pages)
Non Wolf ICBCT30IU Manuel d'utilisateur        (100 pages)
Non Wolf FHBO Manuel d'utilisateur   (8 pages)
Non Wolf CT15G/S Manuel d'utilisateur   (2 pages)
Non Wolf Steamer Manuel d'utilisateur      (59 pages)
Non Wolf Multi-Function Cooktop Manuel d'utilisateur      (63 pages)
Non Wolf 801640 Manuel d'utilisateur   (16 pages)
Non Wolf ICBCT30I Manuel d'utilisateur       (88 pages)
Non Wolf CHR Manuel d'utilisateur   (20 pages)
Non Wolf WKEHD1 Manuel d'utilisateur   (2 pages)
  • David Clark Tiny-tach Jugs-sports MABIS/Duro-Med Razor™
  • QNAP NAS et serveurs de stockage Denon Récepteur NEC Systèmes d'exploitation Chevrolet Navigateurs Corsair Accessoires de refroidissement du matériel
  • Mitel 5215 Philips HP8300/20 Denon Cocoon Yamaha NS-BP100 Lg LPC-LM535X
  • Smeg U3F082P Manuel de l'utilisateur LG DLGX9001V Manuel du propriétaire Denon DMD-1000 Manuel de l'utilisateur Yamaha DD-5 Manuel du propriétaire LG HLT35W Manuel de l'utilisateur