Wolf Sub-Zero 700TF Guide d'installation Page 14

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 20
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 13
Integrated Installation 14
MOUNTING
BRACKET
Kickplate/grille installation.
T
he kickplate/grille may be painted another color, if
desired. Follow these easy steps:
Rough up the surface to be painted with fine grit sand-
paper.
Wipe with alcohol to ensure that the surface is clean
and dry.
Use an appliance or industrial grade, oil base, high
gloss enamel paint.
Kickplate/Grille Installation
O
nce the integrated unit is secured, the kickplate/grille
can be installed. The mounting bracket may be adjusted
slightly forward or back so the kickplate/grille will fit flush
with the surrounding area. Refer to the illustration below.
The kickplate/grille must be removable for servicing. The
floor cannot interfere with removal.
IMPORTANT NOTE: The unit must be allowed to have
ventilation through the fins of the kickplate/grille. You may
cover the solid area, but do not block the fins. The lower
drawer panel may hang in front of the fins, but the base-
board molding must not cover them.
Turn power back on to the electrical outlet.
Vue de la page 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire