Wolf ICBWWD30 Manuel d'utilisateur Page 20
- Page / 94
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
20
WOLF WARMING DRAWER
INTEGRATED FRONT PANEL
INSTALL FRONT PANEL TO DRAWER
Disconnect the communications line from
communications jack. The communications
jack is removed by depressing retaining clip
from front of mounting panel, then pushing
the retaining clip side of jack through
mounting panel first, then pivoting jack out of
mounting panel. Place removed communica-
tions jack inside drawer frame assembly.
Place the metal panel from the integrated
drawer front onto the back of the decorative
front panel. Trace all of the holes in the metal
panel onto the decorative panel.
Draw a line from the edge of the oblong holes
to the corresponding oblong hole below it.
The markings on the back of the decorative
panel should look like the bottom panel illus-
tration below.
For every round marking on the decorative
panel (12 locations, six for screw heads and six
for the backs of the rubber bumpers), drill a
12.7 mm hole, 6.35 mm deep in the back of the
panel.
Route out the rectangular areas (8 locations)
marked on the back of the decorative panel
6.35 mm deep.
Attach the handle hardware to the front of the
decorative panel. The integrated drawer front
kit does not include a handle. This allows the
homeowner to match handle hardware with
the surrounding cabinetry.
Using the six screws that came with the
warming drawer, install the metal panel from
the integrated drawer front kit onto the
warming drawer front. Make sure the brushed
side of the metal panel is facing the warming
drawer.
Install the six rubber bumpers, provided with
the warming drawer front kit, onto the metal
panel. Attach the decorative panel to the
warming drawer by screwing through the back
of the warming drawer into the decorative
front panel using the six, 12.7 mm mounting
screws provided with the kit.
Location of bumpers and mounting
screws
Back view of decorative panel
- WARMING DRAWER 1
- FRANÇAIS 40 3
- ITALIANO 58 3
- DEUTSCH 76 3
- ENGLISH 4 3
- ESPÃNOL 22 3
- INFORMATION 4
- Rating plate location 5
- Optional 6
- Drawer Front 9
- Install warming drawer trim 16
- Warming drawer installation 19
- Back view of decorative panel 20
- INFORMACIÓN 22
- DE CONTACTO 22
- INOXIDABLE 27
- DE CONTACT 40
- Emplacement de la plaque 41
- Des accessoires 42
- TIROIR INTEGREE 46
- INFORMAZIONI 58
- PER I CONTATTI 58
- ACCIAIO INOSSIDABILE 63
- VORSICHT 76
- Position des 77
- Typenschilds 77
- Optionales Zubehör 78
- Wolf-Händler 78
- HINTER RAHMEN 79
- GESAMTBREITE 79
- GESAMTTIEFE 79
- KIPPSCHUTZBLOCK-AUSFÜHRUNG 80
- PLATTFORMAUSFÜHRUNG 80
- ROHBAUÖFFNUNG FÜR 81
- WÄRMESCHUBLADE 81
- BACKOFENROHBAUÖFFNUNG 81
- SEITENANSICHT 81
- ICBWWD30 82
- Position der 88
- Montagelöcher 88
- Seitenlochs 89
- Verkleidungsausführung 90
- Gummipuffer 92
- Dekorplatte 92
- Schraube 92
- Metallplatte 92
- 811418 11/2007 94
Produits connexes et manuels pour Chauffe-eau Wolf ICBWWD30
(2 pages)Franke KBX160_34L manuales
Manuales del propietario y guías del usuario para Fregaderos De Cocina Franke KBX160_34L.
Ofrecemos 1 manuales en pdf Franke KBX160_34L para descargar gratis por tipos de documentos: Ficha de datos
Commentaires sur ces manuels